0
For architects
Show all
Show all
Contact

Or search directly in a category

HOME
//
... // Catalogue
//
eNet
//
Products

eNet radio switch/push-button actuator 8-gang / blinds actuator 4-gang, rail mounting device, 4 rail units

FM AS 816 REG

eNet radio switch/push-button actuator 8-gang / blinds actuator 4-gang, rail mounting device, 4 rail units
arrow-slider
arrow-slider
  • eNet radio switch/push-button actuator 8-gang / blinds actuator 4-gang, rail mounting device, 4 rail units
arrow-left-slim
arrow-right-slim
  • eNet radio switch/push-button actuator 8-gang / blinds actuator 4-gang, rail mounting device, 4 rail units
FM AS 816 REG
BPIK_Logo_eNet
BPIK_Elektrogeraete_Ruecknahme
arrow-left-slim
arrow-right-slim
  • eNet radio switch/push-button actuator 8-gang / blinds actuator 4-gang, rail mounting device, 4 rail units
rail mounting device, 4 rail units

Intended use
  • Switching of lighting
  • Switching of single-phase fan motors
  • Controlling electrically driven blinds, shutters and awnings
  • Operation with suitable eNet radio transmitters
  • Operation with power supply (ref.-no. NT 1220 REG VDC) and eNet radio receiver (ref.-no. FM FK 32 REG) or eNet server
  • Mounting on DIN rail according to EN 60715 in distribution box
 
Product characteristics
  • Operating mode switch for switch-over of switch actuator, push-button actuator, blind actuator, shutter actuator or configuration via eNet server
  • Status feedback to radio transmitter
  • Scene operation possible
  • Outputs switchable with Prog button
  • Status indication of the outputs via LED
 
Switching operation:
  • Switch-on telegram: Device switches on
  • Switch-off telegram: Device switches off
Push-button operation:
  • Relay contact remains closed as long as ON or OFF telegrams are being received
  • The maximum switch-on time is 60 seconds
Operating mode "Venetian blind / Roller shutter":
  • Positioning of the blind and slats via light scene recall
  • Position for sun protection and twilight can be saved
  • Blind/shutter running time can be saved
  • Slat change-over time can be saved
  • Fabric-stretching for awnings
 
Can be set with eNet server in switching/push-button operation:
  • Operating mode for each output can be set separately
  • Flash function
  • Run-on time
  • Switch-on delay / switch-off delay
  • Operation as 1-way NO or 1-way NC contacts
  • Switch-off warning
  • Minimum switching repeat time
  • Operating locks
  • Continuous on, Continuous off
Can be set in the operating mode "Venetian blind/Rolling shutter" with eNet server:
  • Change-over time for direction change
  • Running direction invertible
  • Position for sun protection, twilight, lock-out protection and wind alarm
Supplementary functions with eNet server:
  • Fully-encrypted radio transmission (AES-CCM) from eNet server software version 2.0
  • Update of the device software
  • Reading of error memory
Read less... Read more...
BPIK_Logo_eNet
BPIK_Elektrogeraete_Ruecknahme

Information

Article number: FM AS 816 REG
EAN/GTIN: 4011377087569
Read less... Read more...

Technical data

Rated voltage:AC 230 V ~, 50/60 Hz
Ambient temperature:−5 ... +45 °C
Switching voltage:AC 250 V ~
Minimum actuation time in operating mode
Blind:0.1 s
Shutter:0.3 s
Running time:1 ... 600 s
Running time default setting:120 s
Slat adjusting time:0 ... 10 s
Switching current per output for AC 230 V ~
Ohmic:16 A (AC1)
For switching current > 10 A connecting cable 2.5 mm²
Fluorescent lamps:4 AX
Switching current neighbouring load outputs:Σ 20 A
Current carrying capacity of device:max. 80 A
Contact type:µ
Stand-by power:max. 0.5 W
Connected load per output
Motors:1000 W
Incandescent lamps:2300 W
HV halogen lamps:2000 W
Electronic transformers:1500 W
Inductive transformers:1000 VA
HV LED lamps:typical 500 W
Compact fluorescent lamps:typical 500 W
Fluorescent lamps non-compensated:920 VA
Capacitive load:690 VA (560 µF)
Connection, outputs
Connection mode:screw terminals
single wire:1 x 1.5 ... 4 mm²
stranded without ferrule:1 x 0.75 ... 4 mm²
stranded with ferrule:1 x 0.5 ... 2.5 mm²
Mounting width:72 mm (4 rail units)
Bus line
Rated voltage:DC 12 V SELV
Current consumption:60 mA
Connection bus:terminal
Cable length:max. 3 m
Read less... Read more...
Downloads
Show all downloads
Operating instructions
Select language
Select language
DE
EN
ES
FI
FR
IT
NL
NO
SE
Operating instructions
Select language
Select language
EN
ES
FI
FR
IT
NL
NO
SE
Handbuch
Select language
Select language
DE
EN
NL
Tendering text
AE
Select language
Select language
EN
DE
AT
GB
SG
ES
EE
FR
IT
LT
LV
NL
PL
PT
RU
UA
ZH
EC Declaration of Conformity
AE
Select language
Select language
EN
DE
AT
GB
SG
ES
EE
FR
IT
LT
LV
NL
PL
PT
RU
UA
ZH
Product data sheet
AE
Select language
Select language
DE
AT
EN
GB
SG
US
ES
EE
FR
IT
KR
LT
LV
NL
PL
PT
RU
SE
TR
UA
ZH
Read less... Read more...

Logistic

Single item
Packaging unit 1 pc.
Weight 0.334 KG
Length 113 MM
Height 75 MM
Width 76 MM
Carton
Packaging unit 1 pc.
Weight 0.334 KG
Length 113 MM
Height 75 MM
Width 76 MM
Read less... Read more...