KNX LED universal dimming actuator, 4-gang, rail mounting device, 4 rail units, Secure
39004 1S R
4 x 225 W, HV LED lamps typ. 4 x 1 ... 35 W (leading edge phase control), 4 x 1 ... 200 W (trailing edge phase control)
1 x 855 W
rail mounting device, 4 rail units
with manual electronic operation and LED status indication
project design and commissioning with ETS5 or a more recent version
ETS product family: Illumination
Product type: Dimmer
Kasutusotstarve
Toote omadused
Dimming operation characteristic
Logic function characteristics
1 x 855 W
rail mounting device, 4 rail units
with manual electronic operation and LED status indication
project design and commissioning with ETS5 or a more recent version
ETS product family: Illumination
Product type: Dimmer
Kasutusotstarve
- Switching and dimming of incandescent lamps, HV halogen lamps, dimmable HV LED lamps, dimmable compact fluorescent lamps, dimmable inductive transformers with LV halogen or LV LED lamps, dimmable electronic transformers with LV halogen or LV LED lamps
- Mounting on DIN rail according to EN 60715 in distribution box
Toote omadused
- Outputs can be operated manually, construction site mode
- Feedback in manual operation and in bus operation
- Disabling of individual outputs manually or via bus
- Status feedback
- KNX Data Secure compatible with ETS 5.7.3 or higher
- Can be updated with the ETS Service App
Dimming operation characteristic
- Automatic or manual setting of the dimming principle suitable for the load
- Protected against no-load, short-circuit and overheating
- Signal in the event of a short-circuit, power failure and overload
- Feedback of the switching position and the dimming value
- Parameterisable switch-on and dimming behaviour
- Time functions: switch-on delay, switch-off delay, staircase lighting timer with switch-off warning
- Light scene operation
- Status indication of the outputs via LED
- Operating hours counter
- Power failure longer than approx. 5 seconds causes the dimming outputs to switch off. Depending on the parameter setting, the connected load is calibrated after voltage return.
- Increase in output power possible through parallel switching of multiple outputs
- Power extension possible by means of amplifiers (ref.-no. ULZ 1755 REG)
- Optional accessory: compensation module LED, ref.-no.: KM LED 230 U
Logic function characteristics
- Logic gates
- Transformer (conversion)
- Disabling element
- Comparator
- Limit value switch
Read less...
Read more...
Information
| Article number: | 39004 1S R |
|---|---|
| EAN/GTIN: | 4011377179103 |
Read less...
Read more...
Technical data
| Nimipinge: | AC 110 ... 230 V ~ |
| Võrgusagedus: | 50/60 Hz |
| Võimsuskadu: | max. 7 W |
| Elektritarbimine ooterežiimis: | approx. 0.16 W per channel |
| Õhutemperatuur: | −5 ... +45 °C |
| Storage/transport temperature: | −25 ... +70 °C |
| Lamp loads | |
| Operating modes "universal", "leading edge phase control", "LED leading edge phase control" | |
| Connected load, 230 V per output | |
| Hõõglambid: | 20 ... 225 W |
| HV-halogeenlambid: | 20 ... 225 W |
| If the operating mode for incandescent and HV halogen lamps is set to "leading edge phase control" or "LED leading edge phase control", the maximum connected load falls to 20 ... 210 W. | |
| Induktiivsed trafod: | 20 ... 210 VA |
| Inductive transformers with LV LED: | 20 ... 100 VA |
| Elektroonilised trafod: | 20 ... 210 W |
| Electronic transformers with LV LED: | 20 ... 100 W |
| Hämardatavad kõrgepinge LED-lambid: | typical 1 ... 35 W |
| Dimmable compact fluorescent lamps: | typical 20 ... 80 W |
| Mixed load types | |
| Capacitive-inductive: | not permitted |
| If the rated voltage is reduced to 110 V, the lamp loads are reduced to 50 %. | |
| For inductive transformers and inductive transformers with LV LED, the operating mode "leading edge phase control" is not permitted. | |
| Operating modes "trailing edge phase control", "LED trailing edge phase control" | |
| Connected load, 230 V per output | |
| Hõõglambid: | 20 ... 225 W |
| HV-halogeenlambid: | 20 ... 225 W |
| Elektroonilised trafod: | 20 ... 225 W |
| Electronic transformers with LV LED: | 20 ... 200 W |
| Hämardatavad kõrgepinge LED-lambid: | typical 1 ... 200 W |
| Dimmable compact fluorescent lamps: | typical 20 ... 150 W |
| If the rated voltage is reduced to 110 V, the lamp loads are reduced to 50 %. | |
| Mounting width: | 72 mm (4 rail units) |
| KNX | |
| KNX medium: | TP 256 |
| Commissioning mode: | S-mode |
| Rated voltage KNX: | DC 21 ... 32 V SELV |
| Current consumption KNX: | 15 mA |
| Connection | |
| Connection mode: | connection terminal |
| ühe juhtme: | 1 x 0,5 ... 4 mm² |
| Kiudjuhe ilma otsahülsita: | 1 x 0,5 ... 4 mm² |
| Kiudjuhe otsahülsiga: | 1 x 0,5 ... 2,5 mm² |
Read less...
Read more...
Allalaadimised
| Kasutusjuhised | |
|---|---|
| Product documentation | |
| Release notes | |
| Datenbank ETS5 + ETS6 Secure | |
| So wird's gemacht | |
| Update | |
| CAD (dwg) | |
| CAD (stp) | |
| EPLAN Makro | |
| Teenuse kirjeldus | |
| EÜ vastavusdeklaratsioon | |
| Artikli andmeleht |
Read less...
Read more...
Logistic
| Single item | |
|---|---|
| Packaging unit | 1 pc. |
| Weight | 331 G |
| Length | 95 MM |
| Height | 77 MM |
| Width | 96 MM |
| Carton | |
| Packaging unit | 1 pc. |
| Weight | 331 G |
| Length | 95 MM |
| Height | 77 MM |
| Width | 96 MM |
Read less...
Read more...
