KNX room actuator 110-230 V, rail mounting device, 4 rail units
RA 23024 REGHE
rail mounting device, 4 rail units
with manual electronic operation and LED status indication
Only with the ETS 3.0d version or later versions the full functionality will be available.
ETS product family: Output
Product type: Binary output mix
Paredzētais pielietojums
Produkta īpašības
Switching function
Blinds function
Control of valve drives 230 V
with manual electronic operation and LED status indication
Only with the ETS 3.0d version or later versions the full functionality will be available.
ETS product family: Output
Product type: Binary output mix
Paredzētais pielietojums
- Switching of AC 110 ... 230 V electrical loads with floating contacts
- Switching of electrically driven blinds, shutters and awnings
- Heating outputs: electronic outputs for switching electrothermal valve drives
Produkta īpašības
- Outputs can be operated manually, construction site mode
- Feedback in manual operation and in bus operation
- Scene function
- Disabling of individual outputs manually or via bus
Switching function
- Operation as 1-way NO or 1-way NC contacts
- Logic operation and forced guidance
- Feedback function
- Central switching function with collective feedback
- Time functions: switch-on delay, switch-off delay, staircase lighting timer with switch-off warning
Blinds function
- Suitable for 110 ... 230 V AC motors
- Blind/shutter position directly controllable
- Slat position directly controllable
- Feedback of movement status, blind/shutter position and slat position
- Forced position through higher-level controller
- Safety function: rain alarm, frost alarm, 3 independent wind alarms
- Sun protection function
Control of valve drives 230 V
- Switching operation or PWM operation
- Valve drives with characteristics "normally open" or "normally closed" can be controlled
- Overload-protected, short circuit-protected
- Emergency operation in case of bus voltage failure for summer and winter
- Protection against jamming valves
- Forced position
- Cyclical monitoring of the input signals can be parameterised
Read less...
Read more...
Information
| Article number: | RA 23024 REGHE |
|---|---|
| EAN/GTIN: | 4011377036000 |
Read less...
Read more...
Technical data
| KNX medium: | TP 256 |
| KNX supply: | DC 21 ... 32 V SELV |
| Power consumption KNX: | max. 150 mW |
| Nominālais spriegums: | AC 230 / 240 V ~ |
| Tīkla frekvence: | 50/60 Hz |
| Enerģijas zudums: | max. 6 W |
| Apkārtējās vides temperatūra: | −5 ... +45 °C |
| Uzglabāšanas temperatūra: | −25 ... +70 °C |
| Mounting width: | 72 mm (4 rail units) |
| Connection, KNX: | connection terminal |
| Connection, mains and outputs | |
| Connection mode: | screw terminals |
| vienā vadā: | 1 x 0,5 ... 4 mm² |
| Daudzdzīslu vadītājs bez gala uzmavas: | 1 x 0,5 ... 4 mm² |
| Daudzdzīslu vadītājs ar gala uzmavu: | 1 x 0,5 ... 2,5 mm² |
| Heating outputs | |
| Number: | 2 |
| Contact type: | semiconductor, ε |
| Switching voltage: | AC 230/240 V ~ |
| Switching current: | 5 ... 50 mA |
| Switch-on current: | max. 1,5 A (2 s) |
| Number of valve drives: | 1 ... 10 normally closed (NC) |
| Relay outputs | |
| Number: | 4 (2 channels for operating blinds) |
| Contact type: | floating 1-way NO contact (µ contact) |
| Switching voltage: | AC 230/240 V ~ |
| Breaking capacity AC1: | 16 A |
| Breaking capacity AC3: | 6 A |
| Breaking capacity fluorescent lamps: | 16 AX |
| Switching capacities per output | |
| Ohmic load: | 3000 W |
| Capacitive load: | 16 A / max. 140 µF |
| Motori: | 1380 VA |
| Lamp loads | |
| Kvēlspuldzes: | 3000 W |
| Augstsprieguma halogēnās spuldzes: | 2500 W |
| LV halogen lamps with | |
| electronic transformers: | 1500 W |
| inductive transformers: | 1200 VA |
| Fluorescent lamps | |
| non-compensated: | 1000 W |
| parallel compensated: | 1160 W / max. 140 µF |
| – lead-lag circuit: | 2300 W / max. 140 µF |
| Approvals: | VDE |
Read less...
Read more...
Lejupielādes
| Operating instructions | |
|---|---|
| Datenbank ETS2 + ETS3 | |
| Product documentation | |
| ETS3 ab Version d + ETS4 + ETS5 | |
| CAD (dwg) | |
| CAD (stp) | |
| EPLAN Makro | |
| EPLAN Makro | |
| Tehniskā specifikācija | |
| ES Atbilstības deklarācija | |
| Artikeldatenblatt |
Read less...
Read more...
Logistic
| Single item | |
|---|---|
| Packaging unit | 1 pc. |
| Weight | 0.336 KG |
| Length | 96 MM |
| Height | 92 MM |
| Width | 78 MM |
| Carton | |
| Packaging unit | 1 pc. |
| Weight | 0.336 KG |
| Length | 96 MM |
| Height | 92 MM |
| Width | 78 MM |
Read less...
Read more...