0

Energy saving unit (insert), for key card holder RFID

ESU 230-2

Energy saving unit (insert)
ESU 230-2
arrow-left-slim
arrow-right-slim
  • Energy saving unit (insert)
for key card holder RFID ref.-no.: .. CARD RFID ..

The intended use and the product characteristics refer to the complete device, consisting of energy saving unit and key card holder RFID.
 
Intended use
  • Switching of lighting and other loads
  • Triggering of external control systems
  • Installation in flush box with dimensions according to DIN 49073
 
Product characteristics
  • Operation with RFID cards according to RFID standard ISO/IEC 14443 and ISO/IEC 15693
  • 2 1-way NO contacts, one of them with configurable switch-off delay
  • Status indication with RGB lens
  • Lens is dimming down 30 s after inserting the card
  • Switch-off delay is signalled by RGB lens after removing the card
Read less... Read more...

Information

Article number: ESU 230-2
EAN/GTIN: 4011377164697
Read less... Read more...

Technical data

Rated voltage:AC 110 V~ / 230 V~
Mains frequency:50/60 Hz
Switching current AC1 (cos ϕ > 0.8):16 A
Current carrying capacity of device (A1 + A2):max. 16 A
Switch type:2 1-way NO contacts
Contact type:µ
Ambient temperature:−5 ... +45 °C
Storage/transport temperature:−25 ... +75 °C
Stand-by power:max. 0.94 W
Connection mode:screw terminals
single wire:1 x 2.5 mm² or 2 x 1.5 mm²
Connected load, 230 V
Output 1 (A1)
Ohmic:3000 W
Motors:1160 VA
HV halogen lamps:1000 W
Electronic transformers with LV halogen lamps:1000 W
Output 2 (A2)
Switch-off delay:0 ... 240 s (60 s)
Ohmic:3000 W
Capacitive:16 A / 140 µF
Motors:1380 VA
HV halogen lamps:2500 W
Electronic transformers with LV halogen lamps:1500 W
Inductive transformers with LV halogen lamps:1200 VA
HV LED lamps:typical 400 W
Reduction of load
for every 5 °C exceededing 25 °C:−10 %
for installation into wooden or hollow walls:−15 %
for installation into multiple combinations:−20 %
Read less... Read more...
Operating instructions
Tendering text
EC Declaration of Conformity
Article datasheet
Read less... Read more...

Logistic

Single item
Packaging unit 1 pc.
Weight 0.06 KG
Length 70 MM
Height 34 MM
Width 70 MM
Carton
Packaging unit 1 pc.
Weight 0.098 KG
Length 84 MM
Height 70 MM
Width 82 MM
Outer carton
Packaging unit 10 pc.
Weight 1.104 KG
Length 362 MM
Height 88 MM
Width 176 MM
Read less... Read more...