0
For architects

2-gang switch (insert) 10 AX 250 V~, 2 x 1-pole, 1-way

505 U

2-gang switch (insert), 2 x 1-pole, 1-way, 10 AX 250 V ~
505 U
BPIK_C2CCertMark_Bronze_blackontransparent_v3
with screwless terminals for rigid wires up to 2.5 mm2
 
without claws: ref.-no. with additional "E", e.g.: 505 EU

Notice!
Installation only by persons with relevant electrical knowledge and experience!*)
Use only with original JUNG product components approved for this article.
By inappropriate installation you endanger
•  your own life,
•  the life of the user of the electrical appliance.
By inappropriate installation you risk a high loss by damage, e.g. risk by fire.
You assume personal liability in cause of injury to persons or damage of appliances.
Please contact a skilled electrician!

*) Required technical knowledge for installation:
For installation, especially the following technical knowledge is required:
•  the 5 important safety rules: disconnect from mains, secure against reconnecting, verify parts are free of voltage, ground and short-circuit, cover or block off adjacent live parts
•  select adequate tools, measuring devices and personal protective equipment
•  evaluate measuring results
•  selection of the electrical installation material to secure switch-off conditions
•  IP protection levels
•  installation of the electrical installation material
•  type of electric power grid (TN system, IT system, TT system) and the resultant connection terms (common grounding, protective ground, required additional action etc.)
 
Cradle to Cradle certified
 
Read less... Read more...

Information about 2-gang switch (insert), 2 x 1-pole, 1-way, 10 AX 250 V ~ 505 U

Article number: 505 U
EAN/GTIN: 4011377261303
Version: 2 x 1-pole, 1-way
Power SBL (self-ballasted lamps): max. 100 W
Read less... Read more...
 

Frames for 2-gang switch (insert), 2 x 1-pole, 1-way, 10 AX 250 V ~ 505 U

Frames for 2-gang switch (insert), 2 x 1-pole, 1-way, 10 AX 250 V ~ 505 U