ETS product family: Physical sensors
Product type: Movement
Intended use- Requirement-oriented control of lighting, room thermostats and other electrical loads in interiors
- Ceiling installation on fixed ceilings in flush box with dimensions according to DIN 49073 or surface-mounted housing ref.-no.: PM-KAPPE-1 or PM-KAPPE AL-1
Product characteristics- Integrated bus coupling unit
- 3 PIR sensors
- Detection field 360°
- Integrated brightness sensor
- Deployed as presence detector, motion detector, or for alert operation
- Output functions: Switching, staircase lighting function, switching with forced position, value transmitter, light scene extension, operating mode setting for room temperature controller
- Extension of the detection area by way of operating several devices as main unit or extension unit
- Adjuster for manual adjustment of sensitivity
- Status LED: Flashes during motion detection; depending on programming in normal operation or only during the walking test mode
Additional characteristics of "Universal" version:- Manual operation with IR remote control possible (ref.-no.: KNX PM FB IR)
- 5 function blocks for motion detection each with 2 outputs
- Function blocks switchable, e.g. for day/night operation
- PIR sensors can be evaluated separately
- Brightness sensor function with 3 limiting values
- Daylight-dependent light control with max. 3 channels, setpoint adjustment during operation, separate configuration of dimming-up, control and dimming-down phase
- Light control can be combined with presence detector function
Presence detector function:- Detection of the smallest motions e.g. at a workplace for detecting the presence of persons
- Switch on: Motion detection and brightness threshold not reached
- Switch off: No motion in the detection field and run-on time elapsed or brightness threshold exceeded
Motion detector function:- Motion detection for passageways in buildings
After reacting and switching on, the motion detection works independently of the brightness.
Signalling mode:- Brightness-independent detection of motions in the detection field
- Switch on: After detection of an adjustable number of motions within the set monitoring period
- Switch off: No motion in the detection field and run-on time elapsed
UniversalAccessories:protection cage ref.-no.: SK 180-90 WW
surface-mounted housing ref.-no.: PM-KAPPE-1, PM-KAPPE AL-1
