KNX push-button interface, 2-gang, Secure

40002 1S E

ETS product family: Input
Product type: Binary input

Intended use

Inputs for polling conventional, floating contacts, and transmitting telegrams to the KNX bus
Outputs for controlling LEDs
Installation in flush box with dimensions according to DIN 49073 in combination with a suitable cover
When mounting behind switching and push-button inserts, use an appliance box with sufficient installation depth

Product characteristics

Independent channels that operate as inputs or as outputs depending on the ETS parameterisation
Common reference potential for all channels
Disabling individual channels
Supply via bus, no additional power supply necessary
KNX Data Secure compatible with ETS 5.7.7 or ETS 6.3.0 or higher
Can be updated with the ETS Service App

Outputs

Connection of LED e.g. LED lamp, 5 V DC, 2.2 mA (ref-no. 9605 LED ..)
Short-circuit proof, overload protected and protected against polarity reversal
Parallel switching of outputs possible, for electrical loads with higher current requirements

Inputs

Connection of floating contacts, such as push-buttons, switches or reed contacts
Polling with a pulsed current avoids contact contamination (formation of an oxide layer) on the connected contacts
Operating functions: switching, dimming, blind, scene or room temperature control
Value transmitter for dimming, colour temperature, RGBW, temperature or brightness values
Transmitting the current input status after bus voltage failure
Connection of door or window contacts for evaluation of the open, closed, tilted and handle position statuses
Connection of leakage, condensation and temperature sensors
Pulse counter with main and intermediate meters
Combination of adjacent input channels when connecting push-button, door or window contact
Logic functions

Read less... Read more...

Article number:	40002 1S E
EAN/GTIN:	4011377212947

Read less... Read more...

Ambient temperature:	−5 ... +45 °C
Storage/transport temperature:	−25 ... +75 °C
Degree of protection:	IP20
Protection class:	III
Output voltage:	DC 5 V SELV
Output current per channel:	max. 3.2 mA
LED current (red LED with 1.7 V forward voltage):	2.2 mA per output
Length of cable set:	25 cm, extendable to max. 30 m
Recommended cable:	J-Y(St)Y 2 x 2 x 0.8 mm
Dimensions (W x H x D):	43 x 28.5 x 15.4 mm
KNX medium:	TP 256
Commissioning mode:	S-mode
Rated voltage KNX:	DC 21 ... 32 V SELV
Current consumption KNX:	5 ... 10 mA

Read less... Read more...

Downloads

Operating instructions	EN Select language Select language DE ES FR IT NL NO PT RU ZH
Product documentation	EN Select language Select language DE ES
Release notes	EN Select language Select language DE
Database ETS5 + ETS6 Secure	EN Select language Select language DE ES FR IT NL RU
Quick Start Guide	EN Select language
Tendering text	EN Select language Select language DE AT AE GB SG ES EE FR IT LT LV NL PL PT RU UA ZH
EC Declaration of Conformity	EN Select language Select language DE AT AE GB SG ES EE FR IT LT LV NL PL PT RU UA ZH
Article datasheet	EN Select language Select language DE AE GB SG US ES EE FR IT KR LT LV NL PL PT RU SE TR UA ZH