0
For architects

2-gang switch (insert) 10 AX 250 V~, 2 x 1-pole, 2-way

509 U

2-gang switch (insert), 2 x 1-pole, 2-way, 10 AX 250 V ~
509 U
with screw terminals for rigid and flexible wires up to 2.5 mm2
 
without claws: ref.-no. with additional "E", e.g.: 509 EU

Notice!
Installation only by persons with relevant electrical knowledge and experience!*)
Use only with original JUNG product components approved for this article.
By inappropriate installation you endanger
•  your own life,
•  the life of the user of the electrical appliance.
By inappropriate installation you risk a high loss by damage, e.g. risk by fire.
You assume personal liability in cause of injury to persons or damage of appliances.
Please contact a skilled electrician!

*) Required technical knowledge for installation:
For installation, especially the following technical knowledge is required:
•  the 5 important safety rules: disconnect from mains, secure against reconnecting, verify parts are free of voltage, ground and short-circuit, cover or block off adjacent live parts
•  select adequate tools, measuring devices and personal protective equipment
•  evaluate measuring results
•  selection of the electrical installation material to secure switch-off conditions
•  IP protection levels
•  installation of the electrical installation material
•  type of electric power grid (TN system, IT system, TT system) and the resultant connection terms (common grounding, protective ground, required additional action etc.)
 
Read less... Read more...

Information about 2-gang switch (insert), 2 x 1-pole, 2-way, 10 AX 250 V ~ 509 U

Article number: 509 U
EAN/GTIN: 4011377263703
Version: 2 x 1-pole, 2-way
Power SBL (self-ballasted lamps): max. 100 W
Read less... Read more...
 

Frames for 2-gang switch (insert), 2 x 1-pole, 2-way, 10 AX 250 V ~ 509 U

Frames for 2-gang switch (insert), 2 x 1-pole, 2-way, 10 AX 250 V ~ 509 U