Amplifier LED, rail mounting device, 2 rail units
ULZ 1755 REG
rail mounting device, 2 rail units
Intended use
Product characteristics
Intended use
- Power extension of the listed dimmers (ref.-no.: UD 1755 REG, 1730 DD, 1731 DD, 1710 DE, 1711 DE, 1712 DE, FM UD 20250 UP, FM UD 5500 REG, FM UD 420250 REG, 3901 REGHE, 3902 REGHE, 39004 1S R, 39001 1S U)
- Mounting on DIN rail according to EN 60715 in distribution box
Product characteristics
- Connection of several amplifiers to a single dimmer
- The total power of the connected loads is divided between the dimmer and amplifiers
- Power is supplied to the connected loads via a common power cable
- Operation using upstream dimmer
- Electronic over-temperature protection
- Optional accessory: compensation module LED, ref.-no.: KM LED 230 U
Read less...
Read more...
Information
| Article number: | ULZ 1755 REG |
|---|---|
| EAN/GTIN: | 4011377167049 |
Read less...
Read more...
Technical data
| Rated voltage: | AC 230 V ~ |
| Mains frequency: | 50/60 Hz |
| Stand-by power: | approx. 0.5 W |
| Power loss: | approx. 4.3 W |
| Ambient temperature: | −5 ... +45 °C |
| Connection | screw terminals |
| single wire: | 1 x 0.75 ... 4.0 mm² 2 x 0.75 ... 2.5 mm² |
| stranded without ferrule: | 1 x 0.75 ... 4.0 mm² 2 x 0.75 ... 2.5 mm² |
| stranded with ferrule: | 1 x 0.5 ... 2.5 mm² |
| Total length power cable: | max. 100 m |
| Mounting width: | 36 mm (2 rail units) |
| Permissible load depends on dimmer, operating mode and type of load. See operating instructions. | |
Read less...
Read more...
Downloads
| Operating instructions | |
|---|---|
| Tendering text | |
| EC Declaration of Conformity | |
| Product data sheet |
Read less...
Read more...
Logistic
| Single item | |
|---|---|
| Packaging unit | 1 pc. |
| Weight | 124 G |
| Length | 55 MM |
| Height | 63 MM |
| Width | 36 MM |
| Carton | |
| Packaging unit | 1 pc. |
| Weight | 124 G |
| Length | 55 MM |
| Height | 63 MM |
| Width | 36 MM |
Read less...
Read more...