0

Standard touch dimmer insert LED, without satellite input, flush-mounted

1710 DE

Standard touch dimmer insert LED, flush-mounted
1710 DE
BPIK_RLC_LED_Last
BPIK_Elektrogeraete_Ruecknahme
arrow-left-slim
arrow-right-slim
  • Standard touch dimmer insert LED, flush-mounted
without satellite input
for covers JUNG HOME ref.-no.: BT .. 17101 .., BT .. 17102 .., BT .. 17181 .., BT .. 17182 .., BT 17361 ..
for covers eNet ref.-no.: FM .. 1700 .., FM .. 1701 ..
for covers LB Management ref.-no.: .. 1700 .., .. 1750 D .., .. 17180 .., .. 17280 ..
for covers KNX RF ref.-no.: .. 1091 1ST RF .., .. 1092 1ST RF ..

Intended use
  • Switching and dimming of lighting
  • Operation with suitable cover
  • Installation in flush box with dimensions according to DIN 49073
 
Product characteristics
  • Device works according to the leading edge phase control or trailing edge phase control principle
  • Automatic or manual setting of the dimming principle suitable for the load
  • Display of the set operating mode by means of LED
  • Device can be operated without neutral conductor
  • Switch-on via bulb-preserving soft start
  • Switch-on with last brightness or saved switch-on brightness
  • Switch-on brightness can be saved permanently
  • Minimum brightness can be saved permanently
  • Maximum brightness can be saved permanently
  • Electronic short-circuit protection with permanent switch-off after 7 seconds at the latest
  • Electronic over-temperature protection
  • Test operation for functional test
  • Power extension possible by means of amplifiers (ref.-no. ULZ 1755 REG)
  • Optional accessory: compensation module LED, ref.-no.: KM LED 230 U
Read less... Read more...
BPIK_RLC_LED_Last
BPIK_Elektrogeraete_Ruecknahme

Information

Article number: 1710 DE
EAN/GTIN: 4011377166905
Read less... Read more...

Technical data

Rated voltage:AC 230 V ~
Mains frequency:50/60 Hz
Power loss:approx. 2 W
Ambient temperature:−5 ... +45 °C
Connected load at 25 °C
Incandescent lamps:20 ... 210 W
HV halogen lamps:20 ... 210 W
Electronic transformers:20 ... 210 W
Electronic transformers with LV LED:typical 20 ... 60 W
Inductive transformers:20 ... 210 VA
Inductive transformers with LV LED:typical 20 ... 60 VA
Dimmable HV LED lamps:typical 3 ... 60 W
Dimmable compact fluorescent lamps:typical 3 ... 60 W
With setting "LED trailing edge phase control" the max. connection power for HV LED lamps and electronic transformers with LV LED doubles.
Ohmic-capacitive:20 ... 210 W
Capacitive-inductive:not permitted
Ohmic-inductive:20 ... 210 VA
Ohmic and HV LED:typical 3 ... 60 W
Ohmic and CFL:typical 3 ... 60 W
Amplifiers:see instructions for amplifier
Connectionscrew terminals
single wire:1 x 0.5 ... 4.0 mm²
2 x 0.5 ... 2.5 mm²
stranded without ferrule:1 x 0.5 ... 4.0 mm²
2 x 0.5 ... 2.5 mm²
stranded with ferrule:1 x 0.5 ... 4.0 mm²
2 x 0.5 ... 1.5 mm²
Total length power cable:max. 100 m
Read less... Read more...
Operating instructions
Tutorial Inbetriebnahme (Video)
Tendering text
EC Declaration of Conformity
Product data sheet
Read less... Read more...

Logistic

Single item
Packaging unit 1 pc.
Weight 0.099 KG
Length 82 MM
Height 82 MM
Width 45 MM
Carton
Packaging unit 10 pc.
Weight 1.112 KG
Length 235 MM
Height 92 MM
Width 175 MM
Outer carton
Packaging unit 100 pc.
Weight 11.32 KG
Length 460 MM
Height 245 MM
Width 360 MM
Palette
Packaging unit 1200 pc.
Weight 157.84 KG
Length 1200 MM
Height 1200 MM
Width 800 MM
Read less... Read more...

Covers