Universal dimmer LED, with satellite input, surface-mounted

1724 DEB

1724 DEB

with satellite input

Intended use

Switching and dimming of lighting
Operation takes place with a 2- or 3-wire satellite insert, rotary satellite insert or push-button with 1-way NO contact
Mounting in false ceilings

Product characteristics

Device works according to the leading edge phase control or trailing edge phase control principle
Test operation for functional test
Automatic or manual setting of the dimming principle suitable for the load
Display of the set operating mode by means of LED
Device can be operated without neutral conductor
Switch-on via bulb-preserving soft start
Switch-on with last brightness or saved switch-on brightness
Switch-on brightness can be saved permanently
Minimum brightness can be saved permanently
Electronic short-circuit protection with permanent switch-off after 7 seconds at the latest
Electronic over-temperature protection
Power extension possible by means of amplifiers (ref.-no. ULZ 1755 REG)
Optional accessory: compensation module LED, ref.-no.: KM LED 230 U

Read less... Read more...

Article number:	1724 DEB
EAN/GTIN:	4011377177093

Read less... Read more...

Rated voltage:	AC 230 V ~
Mains frequency:	50/60 Hz
Stand-by power:	approx. 0.3 W
Power loss:	approx. 2 W
Ambient temperature:	−5 ... +45 °C
Connected load at 25 °C
Incandescent lamps:	20 ... 210 W
HV halogen lamps:	20 ... 210 W
Electronic transformers:	20 ... 210 W
Electronic transformers with LV LED:	typical 20 ... 50 W
Inductive transformers:	20 ... 210 VA
Inductive transformers with LV LED:	typical 20 ... 50 VA
Dimmable HV LED lamps:	typical 3 ... 50 W
Dimmable compact fluorescent lamps:	typical 3 ... 50 W
With setting "LED trailing edge phase control" the max. connection power for HV LED lamps and electronic transformers with LV LED doubles.
Ohmic-capacitive:	20 ... 210 W
Capacitive-inductive:	not permitted
Ohmic-inductive:	20 ... 210 VA
Ohmic and HV LED:	typical 3 ... 50 W
Ohmic and CFL:	typical 3 ... 50 W
Amplifiers:	see instructions for amplifier
Connection
Connection mode:	screw terminals
single wire:	1 x 0.75 ... 2.5 mm² 2 x 0.75 ... 1.5 mm²
stranded without ferrule:	1 x 1.0 ... 4.0 mm² 2 x 1.0 ... 2.5 mm²
stranded with ferrule:	1 x 1.0 ... 2.5 mm² 2 x 1.0 ... 1.0 mm²
Number of satellite units
Satellite insert 2-wire 1720 NE:	unlimited
Satellite insert 3-wire 1723 NE:	10
Rotary satellite insert 3-wire 1733 DNE:	10
Number of unlit installation buttons:	unlimited
Total length of satellite cable:	max. 100 m
Total length power cable:	max. 100 m
Width	53 mm
Height	97 mm
Depth:	36 mm

Read less... Read more...

Downloads

Operating instructions	Select language Select language DE EN ES FI FR IT NL NO PT RU SE ZH
Tendering text	SG Select language Select language EN DE AT AE GB ES EE FR IT LT LV NL PL PT RU UA ZH
EC Declaration of Conformity	SG Select language Select language EN DE AT AE GB ES EE FR IT LT LV NL PL PT RU UA ZH
Product data sheet	SG Select language Select language DE EN AE GB US ES EE FR IT KR LT LV NL PL PT RU SE TR UA ZH