0

KNX universal dimming actuator, 1-gang, flush-mounted, Secure

39001 1S U

KNX universal dimming actuator, 1-gang, flush-mounted
39001 1S U
BPIK_KNX_Secure
BPIK_Elektrogeraete_Ruecknahme
arrow-left-slim
arrow-right-slim
  • KNX universal dimming actuator, 1-gang, flush-mounted
ETS product family: Illumination
Product type: Dimmer

Intended use
  • Switching and dimming of lighting
  • Reading in switching states of installation switches or push-buttons and other floating contacts at inputs 1...3
  • Signal evaluation of condensation (ref.-no.: BTS 01) and leakage sensors (ref.-no.: LES 01) at inputs 1...3
  • Acquisition of temperature values via NTC temperature sensor at input 3 (ref.-no.: FF NTC)
  • Installation in flush box with dimensions according to DIN 49073
 
Product characteristics
  • Output can be operated via KNX telegrams or satellite inputs
  • Three extension inputs for connecting floating contacts or dew/leakage sensors. NTC temperature sensor can be connected to input 3.
  • Supply via bus, no additional power supply necessary
  • KNX Data Secure compatible with ETS 5.7.3 or higher
  • Can be updated with the ETS Service App
 
Dimming operation characteristic
  • Automatic or manual setting of the dimming principle suitable for the load
  • Protected against no-load, short-circuit and overheating
  • Signal in the event of a short-circuit
  • Feedback of the switching position and the dimming value
  • Parameterisable switch-on and dimming behaviour
  • Time functions: switch-on delay, switch-off delay, staircase lighting timer with switch-off warning
  • Light scene operation
  • Operating hours counter
  • Power failure longer than approx. 5 seconds causes the dimming outputs to switch off. Depending on the parameter setting, the connected load is calibrated after voltage return.
  • Power extension possible by means of amplifiers (ref.-no. ULZ 1755 REG)
 
Characteristics satellite input
  • Operating functions switching, dimming (including colour temperature), controlling blinds, value transmitter (1 byte, 2 byte, 3 byte and 6 byte incl. RGBW und colour temperature presets), scene extension etc.
  • Disabling function
  • Debounce time adjustable
 
Logic function characteristics
  • Logic gates
  • Transformer (conversion)
  • Disabling element
  • Comparator
  • Limit value switch
Read less... Read more...
BPIK_KNX_Secure
BPIK_Elektrogeraete_Ruecknahme

Information

Article number: 39001 1S U
EAN/GTIN: 4011377194854
Read less... Read more...

Technical data

Rated voltage:AC 230 / 240 V ~
Mains frequency:50/60 Hz
Power loss:max. 1.5 W
Stand-by power:approx. 0.2 W
Ambient temperature:−5 ... +45 °C
Storage/transport temperature:−25 ... +70 °C
Dimensions (W x H x D):48 x 50 x 28 mm
KNX medium:TP 256
Commissioning mode:S-mode
Rated voltage KNX:DC 21 ... 32 V SELV
Current consumption KNX:5 ... 18 mA
Connection, KNX:connection terminal to control cable
Output
Connection mode:screw terminals
Rated voltage:AC 230 / 240 V ~
The permissible load depends on the lamps connected and the type of load set.
Leading edge phase control
Incandescent / HV halogen lamps20 ... 210 W
Inductive transformers:20 ... 210 VA
Inductive transformers with LV LED:20 ... 100 VA
Dimmable HV LED lamps:1 ... 32 W
Trailing edge phase control
Incandescent / HV halogen lamps20 ... 230 W
Electronic transformers:20 ... 230 W
Electronic transformers with LV LED:20 ... 200 W
Dimmable HV LED lamps:1 ... 200 W
Reduction of load
for installation into wooden or hollow walls:−15 %
for installation into multiple combinations:−20 %
Connection
Connection mode:screw terminals
single wire:1 x 0.5 ... 4 mm²
stranded without ferrule:1 x 0.5 ... 4 mm²
stranded with ferrule:1 x 0.5 ... 2.5 mm²
Inputs
Control cable:YY6x0.6 (preterminated)
Input type:floating
Number:3
Total length of satellite cable:max. 10 m
Cable type:J-Y(St)Y (preferable)
Polling voltage:approx. 5 V (satellite inputs)
Read less... Read more...
Operating instructions
Product documentation
Release notes
Datenbank ETS5 Secure
CAD (dwg)
Tendering text
EC Declaration of Conformity
Product data sheet
Read less... Read more...

Logistic

Single item
Packaging unit 1 pc.
Weight 0.052 KG
Length 88 MM
Height 38 MM
Width 82 MM
Carton
Packaging unit 1 pc.
Weight 0.088 KG
Length 86 MM
Height 70 MM
Width 84 MM
Outer carton
Packaging unit 10 pc.
Weight 0.97 KG
Length 360 MM
Height 90 MM
Width 184 MM
Read less... Read more...